Traction cutting machine
+
  • Traction cutting machine

Traction cutting machine

The machine up and down by rubber roller, pneumatic pressure, on-site operation. Gear rack, etc.

WhatsApp:

Share to

  • 产品描述
  • Product Introduction

    ● The machine up and down by rubber roller, pneumatic pressure, on-site operation. Gear rack, etc.

    ● The last line of the machine is healing board after cooing compaction device,the pressure can be adjusted according to the quality of the paper and relevant condions.

    ● Rubber roller diameter is 500 mm, up and down roller body of wall thickness of 30 mm, can prevent the compression defomation of the roller body. Hang glue unilateral 15 mm thickness hardness is 75 ~ 80, hanging plastic material with nitrile butadiene rubber,high acid and alkali resistant slrengh, make the ruller roller is not easy to deformation, long service life.
    ● 11 kw variable frequency drive motor for gear motor

    ● Is the role of tractor adhesive paper unifom velocity of the cutting machine and then transported to cross-cutting machine, make is crosscuting even without error.

    ● Cutting department structure characteristics.
    ● Fine grinding processing blade knife shaft diameter 124 mm to pick a spiral groove to prevent the knife dish sliding do dynamic balance processing.

    ● Eauiped with thre groups of longitudinal cutting knife. blade with diameter of 320 mm large circular knife material of 45 # manganese sieel, no burrs after cutting the cardboard is neat, the blade sharp and durable. paper neatly.
    ● Gear motor adopts 2.2 Kw inverter, independent drive, frequency control of motor speed can track the whole production line speed synchronizalion operalion more convenient, the main power supply from cross-cutting knife work station.

    ● The machine adopts automatic correction method, automatic tracking correction, ensure that the size of the edge points, effecively cooperate with cardboard running deviation, reduce the waste of paper.

Get More Product Information

*Note: Please fill in the information accurately and keep the communication open. We will contact you as soon as possible.

Submit

Related Products

Complete corrugated paperboard production line is compose of shaftless mill roll stand, fingerless type single facer( vacuum suction type), preheater
Go to Product View More
It adopts a double tube symmetrical four arm structure, which can support two rolls of raw paper at the same time.
Go to Product View More
The sturcture is double rotary shaft with four arms;Supporttwo paper mill rolls on both arms at the same time
Go to Product View More
Adopting a negative pressure design, the core paper can be uniformly compressed and attached to the surface of the corrugated  roller, and evenly coated with glue to improve the adhesion of single sided corrugated paper
Go to Product View More

Request Quote

We will contact you within one working day. Please pay attention to your email.

SUBMIT